Analysis Plus Power Cables


CNDI and DMS filters and upgraded platinum foil capacitors
100% passive, non-current limiting topography, four isolated outlets
Quiet backgrounds
Carbon fiber resonance vibration control
Quiet backgrounds increase inner detail with raw dynamics
Effective for audio and video

Duplex: 3
Current: 15A
Power: 1800W
Dimensions: 6.75 W x 6in H x 10.5in D
Weight: 24lbs


The cable has a balanced design for lower common mode noise. A unique feature with our patented hollow oval design is the ground lead surrounds the hot and cold leads to keep the signal pristine. Other power cords designs are like a leaky sewer where electromagnetic noise seeps in and oozes out. With its low inductance design and extra shield it has a very low noise floor for a better Signal to Noise Ratio (SNR) to help bring out subtle nuances in the music. With this new design it has the ultimate in shielding for better ElectroMagnectic Interference (EMI) and ElectroMagnectic Compatibility (EMC). The Ultimate Power Oval takes the power cord to the next level in performance and design. It will work great with any of your equipment from DAC, Pre Amp, Power Amp …I really do not know how we could design a better power cord. This is heirloom statement piece of audio equipment that will give you years of pleasure in owning and listening to.


A great combination a hospital grade 4 box with Analysis Plus Power Oval Ten power cord. Rugged Lexan construction. Heavy-duty, triple-wipe, high performance line contacts for excellent retention and conductivity. Dielectric Voltage withstands 2000V per UL498. Maximum Working Voltage 250V AC or DC. Meets NEC standards. UL listed. CSA certified. You can now replace those low cost outlet strips with a quality connection system.
Available with or without surge protection.

The price matrix shown below does not include surge protection.


The Power Oval 2 has a new braid design on the shield and the size has increased to 10 gauge.According to literature, transient noise voltages in power distribution systems are produced by sudden changes in current demand. A low impedance transmission line design, such as that used by Analysis Plus Power Cord Oval cable, is recommended to minimize this noise. The current carrying conductors are then surrounded with a shield to prevent pick-up of high frequency noise. Terminated with WattGate connectors.

When people design power cords they use massive cable to reduce the noise voltage on the cable. The noise voltage that occurs on the cable is related to L (inductance) and di/dt (the rate of change in the current). You can reduce L by using larger gauge wire but you don’t get much bang for your buck because it is a log function. What this means is that as you keep increasing the gauge of the wire you do not get much improvement for your effort. This is why you see people using very heavy and stiff wires in power cords. I have seen some power cords that are so big and stiff that the CD player connected to them is lifted off the ground.What we have done at Analysis Plus is use computer simulation to optimize the design of a power distribution system. What we discovered is our patented hollow oval design provides a low L cable without having to use stiff and bulky cables. Our cables have a super low noise voltage to reduce the background noise to a minimum. This is extremely important during quiet passages, if you want to hear subtle details (this is very important for classical music fans and for other lovers of live music).The other thing people don’t realize about low frequency noise is that the thin aluminum shield found on many power cords does nothing to reduce this problem. The best way to reduce low frequency noise on cables is to reduce loop area. From our computer simulation and measurements we found our patented hollow oval cables does a great job at this. We have the lowest noise voltage we have seen with our hollow oval design.For higher frequencies our silver-plated copper braided shield does a great job. We used an open braid design that works much like the window on your microwave oven. You can see through the window but the radiation stays where it belongs.

Terminated with WattGate connectors, this power cable is engineered to deliver your audio/video components the clean power they deserve.


Our new Power Oval 10 is a 10AWG 600 Volts CL2 UL approved power cable.

Although Oval 10 is the best choice for high current applications, it performs equally well with low current analog and digital equipment too. WattGate 320 IEC and WattGate 5266 connectors are used with this power cable.


Constructed of pure silver over a stabilizing strand of oxygen-free copper, woven into our patent hollow oval geometry in an oval-coaxial configuration. It is hard to believe that a cable with this low of cross-sectional area is made of two 18 gauge conductors that are surrounded by low loss FEP.

power plug size H (tip size 3.4mm O.D., 1.3mm I.D.)
power plug size K (tip size 5mm O.D., 2.1mm I.D.)
power plug size L (tip size 5mm O.D., 2.5mm I.D.)
power plug size M (tip size 5.5mm O.D., 2.1mm I.D. barrel 15.2mm)
power plug size N (tip size 5.5mm O.D., 2.5mm I.D. barrel 9.5mm)