Anthem AVRs/Processors

Anthem AVRs/Processors

Screen Shot 2017-02-08 at 11.10.54 PM

Separates-Quality Performance in a Gutsy, Feature-Rich AV Receiver.

Experience the breathtaking power and multi-channel flexibility of Anthem’s NEW Third Generation MRX Series of AV Receivers.

Anthem’s award-winning Third Generation MRX Series of high-end multi-channel A/V receivers are known the world over for their excellent sound quality, efficient power handling, and the ease with which they integrate into an entertainment system. The MRX Series is packed with exclusive audio innovations like Anthem Room Correction (ARC) Technology and Advanced Load Monitoring (ALM) Technology, 4K Pass-Through with fast HDMI switching and more.

MRX 1120

mrx-1120

11.2 Pre-Amp / 11 Amplifier Channel A/V receiver with Dolby Atmos and DTS:X. 140 watts per channel continuous power into 8 ohms. Includes ARC (Anthem Room Correction).

MRX 720

mrx-720

11.2 Pre-Amp / 7 Amplifier Channel A/V receiver with Dolby Atmos and DTS:X. 140 watts per channel continuous power into 8 ohms. Includes ARC (Anthem Room Correction).

MRX 520

mrx-520

5.2 Pre-Amp / 5 Amplifier Channel A/V receiver with ARC (Anthem Room Correction). 100 watts per channel continuous power into 8 ohms.

Technical Specifications

PREAMPLIFIER
Maximum Output (<0.1% THD) 4.2 Vrms, subwoofer channel 5.2 Vrms
Frequency Response (2 Vrms output) 10 Hz — 31 kHz (+0, -0.25 dB)
Frequency Response, Analog-Direct (2 Vrms output) 10 Hz — 48 kHz (+0, -0.25 dB)
THD+N (2 Vrms output) -95 dB
S/N Ratio (2 Vrms output, IEC-A filter) 110 dB
PREAMPLIFIER + AMPLIFIER (1 W OUTPUT)
MRX 1120 / MRX 720 -88 dB channels 1-5, -75 db back/height
MRX 520 -88 dB
SPEAKER IMPEDANCE
Compatible with 4 Ohms or higher impedance.
MAXIMUM CONTINUOUS OUTPUT (1% THD)
MRX 1120 MRX 720 MRX 520
Channels 1-5, Two Driven into 8 Ohms 140 W 140 W 100 W
Channels 1-5, Two Driven into 6 Ohms 170 W 170 W 130 W
Remaining Channels, Two Driven into 8 Ohms 60 W 60 W n/a
Remaining Channels, Two Driven into 6 Ohms 75 W 75 W n/a
POWER CONSUMPTION
MRX 1120 MRX 720 MRX 520
Typical Load 570 W 485 W 365 W
Standby 0.3 W 0.3 W 0.3 W
Standby IP Control Enabled 4.7 W 4.7 W 2.4 W
Standby HDMI Bypass Enabled 8.2 W 8.2 W 5.8 W
DIMENSIONS
Height 6-1/2″ (16.5 cm)
Height with Rackmount Kit 4U
Width 17-1/4″ (43.9 cm)
Depth (not including power cord) 14-3/4″ (37.5 cm)
WEIGHT
MRX 1120 32 lb (14.5 kg)
MRX 720 31 lb (14 kg)
MRX 520 28.2 lb (12.8 kg)
POWER REQUIREMENT
120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.

Anthem Processors

D2v 3D

d2v-3d

Advanced 7.1-channel A/V processor with Anthem Room Correction (ARC)

D2v 3D Specifications

VIDEO SWITCHING
Bandwidth from input to output jack (bypass mode for component video)
Composite and S-Video 70 MHz
Component Y 110 MHz
Pr 90 MHz
Pb 80 MHz
All analog video inputs and outputs are 75 Ω, 1.5 Vp-p.
ANALOG AUDIO
Input Impedance 20 kΩ
Output Impedance Main-RCA 300 Ω
XLR 600 Ω
Zones 2/3 and Record 51 Ω
Rated Input 2.0 Vrms
Maximum Input 5.3 Vrms
Minimum Load 5 kΩ
Rated Output (100 kΩ load) 2.0 Vrms
Maximum Output RCA 6.3 Vrms
XLR 12.6 Vrms
Headphone Output 100 mW into 32 Ω at 0.2% THD+N
Volume Control Range Main – 95.5 dB to +31.5 dB (in 0.5 dB increments)
Zone 2/3 and Headphone – 62.5 dB to +10.0 dB (in 1.25 dB increments)
Crosstalk (at 1 kHz) 82 dB between channels; 86 dB between inputs
XLR Pin Configuration Pin 1: Ground, Pin 2: Positive, Pin 3: Negative
DIGITAL AUDIO
Crossover High-Pass Slope (small speaker setting) 12 dB/octave (2nd order)
Low-Pass Slope (subwoofer) 24 dB/octave (4th order)
Frequency (adjustable) 25 Hz to 160 Hz (in 5 Hz increments)
Tone Control Fliter Type Shelf
Range +/- 12 dB
Bass Turnover Frequency 200 Hz
Treble Turnover Frequency 2 kHz
Analog-to-Digital Conversion S/N Ratio (at digital Rec output) (IEC-A Filter) 100 dB
All digital audio inputs and outputs comply with HDMI, S/PDIF or AES/EBU standards. Sample rate converter output is 24 bit/192 kHz regardless of input.
MAIN PATH (RCA AND XLR OUTPUTS)
Frequency Response and Bandwidth Analog Direct Inputs 10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 130 kHz (+0 -3 dB)
Analog-DSP Inputs at 24/96 10 Hz to 20 kHz (+0 -0.3 dB), 2 Hz to 44.1 kHz (+0 -3 dB)
Digital Inputs at 24/96 10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 45 kHz (+0 -3 dB)
THD+N (at Rated Input and Output) Analog Direct Inputs 0.006% (80 kHz BW)
Analog-DSP Inputs at 24/48 or 24/96 0.004% (AES17 Filter)
Digital Inputs at 24/48 or 24/96 0.004% (AES17 Filter)
IMD (CCIF at 15 kHz and 16 kHz) Analog Direct Inputs <0.001%
Analog-DSP Inputs at 24/48 0.001%
Digital Inputs at 24/48 or 24/96 0.001%
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) Analog Direct Inputs 107 dB
Analog-DSP Inputs at 24/48 or 24/96 101 dB
Digital Inputs at 24/48 or 24/96 104 dB
ZONE 2 AND ZONE 3 PATHS
Frequency Response and Bandwidth 20 Hz to 20 kHz (+0 -0.1 dB), 3 Hz to 140 kHz (+0 -3 dB)
THD+N (at Rated Input and Output) 0.06% (80 kHz BW)
IMD (CCIF at 15 kHz and 16 kHz) 0.06%
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) 97 dB
FM TUNER
Sensitivity 50 dB S/N 13 dBµ typical, 25 dBµ max.
IHF 10 dBµ typical, 20 dBµ max.
S/N Ratio Mono 75 dB typical, 65 dB min.
Stereo 69 dB typical, 60 dB min.
Distortion Mono 0.2% typical, 1.0% max.
Stereo 0.3% typical, 1.5% max.
Stereo Separation 40 dB typical, 25 dB min.
Alternate Channel Selectivity (+/- 400 kHz) 70 dB typical, 60 dB min.
Frequency Response 25 Hz to 15 kHz (+0 -2 dB)
AM TUNER
Sensitivity (20 dB S/N) 49 dBµ typical, 56 dBµ max.
S/N Ratio 50 dB typical, 43 dB min.
Distortion 0.7% typical, 2.0% max.
One-Signal Selectivity (+/- 10 kHz) 24 dB typical, 18 dB min.
CONTROL
Infra Red Carrier Frequency 38 kHz
Maximum 12 V Supply Current 150 mA
Maximum Emitter Current 60 mA per output
RS-232 Interface Connection DB-9F, straight-wired
Pinout (D2v side) Pin 2: Tx, Pin 3: Rx, Pin 5: Ground
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Configuration 8 data bits, 1 stop bit, no parity bits, flow control (RTS/CTS, none)
Trigger Outputs Polarity tip positive, sleeve ground
Maximum Current at 12 VDC 300 mA between all three triggers
Sequential Delay 250 ms
POWER REQUIREMENT
Consumption Maximum 170 W
DIMENSIONS
Height 5-7/8 inches (14.9 cm) including feet;
rack-mounting: 3 rack units without feet
Width Standard version 19-1/4 inches (49 cm)
Rack-Mount version 19 inches (48.3 cm)
No-Handle version 17-1/4 inches (43.8 cm)
Depth 15-1/4 inches (38.7 cm)
Weight (unpacked) 27 lb (12.3 kg)
AVAILABLE FINISH – Black

AVM 60

avm-60

11.2 A/V Pre-Amplifier/Processor with Dolby Atmos & DTS:X, and Anthem Room Correction (ARC)

AVM 60 Specifications

PREAMPLIFIER (MEASURED AT XLR OUTPUT)
Maximum Output (<0.1% THD) 8.4 Vrms, subwoofer channel 9.9 Vrms
Frequency Response (2 Vrms output) 10 Hz — 35 kHz (+0, -0.25 dB)
Frequency Response, Analog-Direct (2 Vrms output) 10 Hz — 80 kHz (+0, -0.25 dB)
THD+N (2 Vrms output) -95 dB
S/N Ratio (2 Vrms output, IEC-A filter) 110 dB
POWER CONSUMPTION
Typical Load 60 W
Standby 0.3 W
Standby IP Control Enabled 4.7 W
Standby HDMI Bypass Enabled 8.2 W
DIMENSIONS
Height 6-1/2″ (16.5 cm)
Height with Rackmount Kit 4U
Width 17-1/4″ (43.9 cm)
Depth (not including power cord) 14-1/2″ (36.4 cm)
Weight 20 lb (9 kg)
POWER REQUIREMENT
120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.