MJ Acoustics Home Theater Subwoofer

Pro Series

PRO 50 MkIII (Active Sub Bass System)

P50mk3-DRV-PNL-web

MJ Acoustics always set the standards for affordable subwoofers. Redesigned from the ground up this subwoofer has it all. Twin crossovers, 120watts of power, new designed 10” driver and all packed into a diminutive cabinet size of just 280mm cube. Designed to integrate with any speaker from small satellites to high end floor standers. With bass out put down to 13hz and a -3db rating at 19hz in room it really is unbelievable value.

The All New PRO 50Mk3 has almost all of its internal electronic assemblies redesigned to fine tune the output. This little gem has it all. If you are looking for the best value upgrade to your existing music system then this product is for you. Enhancements made to further reduce floor noise and increase signal path clarity place it in the relms of a true audiophile product.

The cabinet structure has also had a re-work, extending the internal volume by aproximately 5%. the options for colour choice have been extended to include all the real Wood Veneers as standard with colour Satin and Gloss finishes available at extra cost.

The PRO 50 Mk3 is an awesome adjunct to complement the most discerning cinema and music system! The 120 watts MOSFET amplifier feeds an ultra long-throw super-rigid 10” sub-bass driver of rugged design and finish. Add to this a beautiful non-reflective standard satin finish, and attention to the finest and smallest detail. The PRO 50Mk3 delivers vast punch and solid slam – without the dreaded overhang – down to a gut-wrenching 13Hz.

Our unique combination of state-of-the-art electronics and tuned hand-built sealed cabinet, affords the user the ultimate in sub-bass control. Deep and powerful enough for the most demanding movie sound-track, yet subtle, agile, fast, and accurate for the highest fidelity in music listening. It’s just like being there!

When subwoofers sound and look this good, there’s no alternative. The best 100% British Subwoofers available.

PRO 50 Mk3 Specifications
  • 120watt MOSFET Amplifier
  • Speaker and Line Level inputs with Gain Control Range 80 and 60dB
  • Neutrik Speakon connector (High level 100k ohm)
  • Unbalanced RCA (phono) connector (Gold Plated) (Low level 10k ohm)
  • Twin Sophisticated Crossover Circuits – variable increments between 20Hz and 120Hz
  • LFE Bypass setting which opens crossover to 200hz on line level input
  • Phase Control infinitely adjustable between 0º and 180º
  • Frequency response 13hz to 200hz * I.S.P. ( Intelligent Speaker Protection)
  • Specially designed cabinet structure, volume, and configuration made from inert 18 MDF
  • Switched fused IEC mains input socket
  • 250mm (10”) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets
  • UK 2 year manufacturers return to base warranty
  • Dimensions (WxHxD ) 280mm X 328mm X 280mm * Weight 11.55kg (25.46 lbs)
  • Black Satin Paint and Real Wood Veneer finishes as standard (Other Color Options available)

PRO 60 MkI Active Sub Bass System

Pro-60-Mk1-DRV-PNL-web

MJ Acoustics Set a new standard for affordable subwoofers. designed from the ground up this subwoofer has it all. Twin crossovers, 150watts of power, new designed 12” driver and all packed into a diminutive cabinet size of just 345mm cube. Designed to integrate with any speaker from small satellites to high end floor standers. With bass out put down to 10hz and a -3db rating at 19hz in room it really is unbelievable value.

The PRO 60 MkI is an audiophile adjunct to complement the most discerning cinema and music system! The 150 watts MOSFET amplifier feeds an ultra long-throw super-rigid 12” sub-bass driver of rugged design and finish. Add to this a beautiful non-reflective satin finish, and attention to the finest and smallest detail. The PRO 60MkI delivers vast punch and solid slam – without the dreaded overhang – down to a gut-wrenching 10Hz.

Our unique combination of state-of-the-art electronics and tuned hand-built sealed cabinet, affords the user the ultimate in sub-bass control. Deep and powerful enough for the most demanding movie sound-track, yet subtle, agile, fast, and accurate for the highest fidelity in music listening. It’s just like being there!

PRO 60 MkI Specifications
  • 150watt MOSFET Amplifier
  • Speaker and Line Level inputs with Gain Control Range 80 and 60dB
  • Neutrik Speakon connector (High level 100k ohm)
  • Unbalanced RCA (phono) connector (Gold Plated) (Low level 10k ohm)
  • Twin Sophisticated Crossover Circuits – variable increments between 20Hz and 120Hz
  • LFE Bypass setting which opens crossover to 200hz on line level input
  • Phase Control infinitely adjustable between 0º and 180º
  • Frequency response 10hz to 200hz * I.S.P. ( Intelligent Speaker Protection)
  • Specially designed cabinet structure, volume, and configuration made from inert 18mm MDF
  • Switched fused IEC mains input socket
  • 300mm (12”) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets
  • UK 2 year manufacturers return to base warranty
  • Dimensions (WxHxD ) 345mm X 383mm X 345mm * Weight 15.1kg (33.4 lbs)
  • Black Ash real wood veneer Painted finish as standard

PRO 80 MkI Active Sub Bass System

P80 DRV PNL web

MJ Acoustics Set a new standard for affordable subwoofers. designed from the ground up this subwoofer has it all. Twin inputs that can be used simutaneously, 180watts of power, new designed 12” driver and all packed into a diminutive cabinet size of just 345mm cube. Designed to integrate with any speaker from small satellites to high end floor standers. With bass out put down to 10hz and a -3db rating at 19hz in room it really is unbelievable value.

The PRO 80 MkI is an audiophile adjunct to complement the most discerning cinema and music system! The 180 watts MOSFET amplifier feeds an ultra long-throw super-rigid 12” sub-bass driver of rugged design and finish. Add to this a beautiful non-reflective satin finish, and attention to the finest and smallest detail. The PRO 80MkI delivers vast punch and solid slam – without the dreaded overhang – down to a gut-wrenching 10Hz.

Our unique combination of state-of-the-art electronics and tuned hand-built sealed cabinet, affords the user the ultimate in sub-bass control. Deep and powerful enough for the most demanding movie sound-track, yet subtle, agile, fast, and accurate for the highest fidelity in music listening. It’s just like being there!

PRO 80 MkI Specifications
  • 180watt MOSFET Amplifier
  • Speaker and Line Level inputs with Gain Control Range 99dB
  • Neutrik Speakon connector (High level 100k ohm)
  • Unbalanced RCA (phono) connectors (Gold Plated) (Low level 10k ohm)
  • Sophisticated Crossover Circuits – variable increments between 20Hz and 120Hz
  • LFE Bypass setting
  • Phase Control infinitely adjustable between 0º and 180º
  • Frequency response 13hz to 200hz * D.I.P. (Dynamic Intelligent Protection)
  • D.A.M.P. (Digitally Accurate MicroProcessor 2nd generation)
  • Specially designed cabinet structure, volume, and configuration made from inert 18 & 25mm MDF
  • Digital Display with power output meter and frequency setting
  • Switched fused IEC mains input socket
  • 300mm (12”) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets
  • UK 3 year manufacturers return to base warranty
  • Dimensions (WxHxD ) 345mm X 383mm X 345mm * Weight 15.1kg (33.4 lbs)
  • Black Ash finish as standard with other Real Wood Veneer finishes available

PRO 100 MkII Active Sub Bass System

Pro 100Mk2 FRT GRL PNL web

MJ Acoustics Set a new standard for affordable subwoofers. Redesigned from the ground up this subwoofer has it all. Twin inputs that can be used simutaneously, 200watts of power, new designed 10” drivers with one passive front radiating, all packed into a diminutive cabinet size of just 280mmx 280mm foot print. Designed to integrate with any speaker from small satellites to high end floor standers. With bass output down to 10hz and a -3db rating at 19hz in room it really is unbelievable.

The PRO 100 MkII is an audiophile adjunct to complement the most discerning cinema and music system! The 200 watts MOSFET amplifier feeds an ultra long-throw super-rigid 10” sub-bass driver of rugged design and finish. Add to this a beautiful non-reflective satin finish, and attention to the finest and smallest detail. The PRO 100MkII delivers vast punch and solid slam – without the dreaded overhang – down to a gut-wrenching 10Hz. For a totally imersive and completely unforgettable sound stage the PRO 100Mk2 is the addition to your music system you have been waiting for!

Our unique combination of state-of-the-art electronics and tuned hand-built sealed cabinets, affords the user the ultimate in sub-bass control. Deep and Powerful enough for the most demanding movie sound-track, yet subtle, agile, fast, and accurate for the highest fidelity in music listening. It’s just like being there! TOTALLY UNFORGETTABLE!

PRO 100 MkII Specifications
  • 200watt MOSFET Amplifier
  • Speaker and Line Level inputs with Gain Control Range 99dB
  • Neutrik Speakon connector (High level 100k ohm)
    Unbalanced RCA (phono) connectors (Gold Plated) (Low level 10k ohm)
  • Sophisticated Crossover Circuits – variable increments between 20Hz and 120Hz
  • LFE Bypass setting
  • Phase Control infinitely adjustable between 0º and 180º
  • Frequency response 13hz to 200hz * D.I.P. (Dynamic Intelligent Protection)
  • D.A.M.P. (Digitally Accurate MicroProcessor 2nd generation)
    Specially designed cabinet structure, volume, and configuration made from inert 18 & 25mm MDF
  • Digital Display with power output meter and frequency setting
  • Switched fused IEC mains input socket
  • Single 250mm (10”) Ultra Long-throw Driver with Heavy Duty steel chassis & Double Magnets
  • Single front firing 250mm (10”) Ultra Long-throw Critically shaped
  • ABR with tuned damping
  • UK 3 year manufacturers return to base warranty
  • Dimensions (WxHxD ) 280mm X 605mm X 280mm * Weight 22.1kg
  • Black Ash finish as standard with other Real Wood Veneer finishes available

Reference Series

Reference I MkIII active sub bass system

REF I Mk3 DRV PNL web

The Reference I MkIII has the muscle and flexibility to suit the largest of AV systems. Maximum controllability is available on the Reference I MkIII and is simple to use via its digital displays confirming all your settings. With a 250mm Ultra Long-Throw sub bass driver inside the large ported cabinet, the Reference I MkIII outputs serious SPL and it belies its short stature. The Reference I MkIII is amazingly well equipped and ready for the most demanding movies and the most detailed bass lines. It even comes with a totally out-of-sight remote control and a remote eye receiver to make recalling one of the 4 user-presets an absolute breeze. Ask your local dealer for a demonstration today and experience the missing link to your system!

When subwoofers sound and look this good, there’s no alternative. The best 100% British Subwoofers available.

Reference I MkIII Specifications
  • 250watt MOSFET Amplifier
  • Speaker and Line Level inputs with Gain Control Range 99dB
  • Neutrik Speakon connector (High level 100k ohm)
  • Unbalanced RCA (phono) connectors (Gold Plated) (Low level 10k ohm)
  • Twin Sophisticated crossover circuits – variable increments between 20Hz and 120Hz
  • LFE Bypass setting
  • 12 volt trigger
  • Remote Control with ‘out-of-sight’ RM Eye and 4 user-presets
  • Phase Control infinitely adjustable between 0º and 180º *
  • Frequency response 10hz to 200hz
  • D.I.P. (Dynamic Intelligent Protection)
  • D.A.M.P. (Digitally Accurate MicroProcessor 2nd generation)
  • Ported design cabinet with 100mm internal fluted port.
  • Specially designed cabinet structure, volume, and configuration made from inert 25mm MDF
  • Digital Display with power output meter and frequency setting
  • Switched fused IEC mains input socket
  • 250mm (10”) Ultra Long-Throw Driver with Heavy Duty chassis & Double Magnets
  • UK 3 year manufacturers return to base warranty
  • Dimensions (WxHxD ) 500mm X 458mm X 320mm * Weight 20kg (46.12 lbs)
  • Black Ash finish as standard with other Real Wood Veneer finishes available.