Kuzma

Stabi S is our smallest turntable with a design approach normally found only in more expensive models. Its unique shape and construction of solid brass rods, provide an extremely rigid connection to platter, bearing and tonearm support. There is no flat plate to resonate and transmit vibrations, only solid brass rods 50mm in diameter. A second brass rod provides stability and the two are clamped together in a T shape. The motor is housed independently in its own bras tower which dampens vibration of the motor itself. A ground, flat belt provides drive from the motor pulley to the subplatter.

Turntable Stabi SD is a special version of Stabi S turntable which can accommodate two tonearms. The second tonearm is fixed on the extended T part of the main turntable chassis. Stabi S turntable can be modified to accept a second tonearm by simply replacing the shorter part of T beam with extended version ( either 9 or 12 inch version) which also increases the mass of the Stabi SD turntable. Due to its construction the existing lid of Stabi S does not cover the Stabi SD. Stabi S can be also converted into Stabi S 12 inch version.

Added extra mass also improves turntable’s sound performance!

Stabi SD (double): Options for two tonearms as order or as upgrade from any other version: ( tonearm length in inches) first number indicated right hand side tonearm and second left hand side tonearm

Stabi S ( 9)
Stabi S12 (12)
Stabi SD ( 9+9)
Stabi S9D12 ( 9+12)
Stabi S12D9 (12+9)
Stabi S12D12 (12+12)

Stabi Ref was first introduced in 1992.

This is constructed from two plates, each plate being made from a sandwich construction of two 10 mm aluminium plates, separated by an acrylic plate clamped together with pre-stressed, non-magnetic, stainless steel screws. The turntable chassis (top plate) is suspended by large springs submerged in silicone oil, with a low resonance of 2.2 Hz, which dampens movements of the springs themselves. The main base (bottom plate) is supported by three aluminium and stainless steel spikes. The top plate is easily levelled by four knobs. When this plate is lifted (for transport) the silicone suspension reservoirs are automatically sealed.

This is a modern turntable designed in a classic turntable style with the emphasis on providing the best possible record playback.

The turntable’s size allows even 12 inch tonearms to be mounted and covered with its massive acrylic dust cover on spring hinges . The dust cover is constructed not to pick up any vibration from loud music.

The turntable is assembled from various solid parts of aluminium making the construction rigid and absorbing vibration. On the outer sides of the main structure are solid aluminium plates, which give the turntable mass and further increase structural rigidity and damping.

The covered spikes within the legs allow horizontal levelling of the whole turntable.

Stabi XL DC differs from previous Stabi XL, XL2 & XL4 turntables by using a very special DC motor, a machined plastic belt and a new power supply (PS DC), which gives a new, unique and uniformly precise drive to the platter.

New platter drive lifts this turntable’s performance to a new level.